F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
9. Tighten the evaporator core housing support bracket bolts.
10. NOTE: Vehicle with manual climate control shown, vehicles with EATC similar.
Connect the electrical connectors.
11. NOTE: Install new O-ring seals lubricated in clean mineral oil.
Connect the A/C fittings.
1
Connect the auxiliary evaporator outlet line fitting (if equipped).
2
Connect the auxiliary evaporator inlet line fitting (if equipped).
3
Connect the evaporator inlet line fitting.
All vehicles