ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 12016 > < Initial Inspection and Diagnostic Overview|Page 12014
Page 2
background image

-

make sure the headlamps are operating and are correctly aimed.

3. NOTE:  The vertical wall screen must be a minimum of 2.4 meter (8 ft) wide.

Park the vehicle on a level surface approximately 7.6 meters (25 ft) from the vertical wall or screen directly in front of it.

4. The correct visual aim for the fog lamps is with the top edge of the high-intensity zone 10 cm (4 in) below the horizontal center of the fog lamps.

Initial Inspection and Diagnostic Overview|Page 12016 > < Initial Inspection and Diagnostic Overview|Page 12014