F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
by the equipment manufacturer.
3. Recover the refrigerant from the system following the operating instructions provided by the equipment manufacturer.
4. Once the refrigerant service center has recovered the refrigerant, switch OFF the power supply.
5. Allow the system to set for about two minutes, and observe the system vacuum reading. If the vacuum is not lost, disconnect the recovery
equipment.
6. If the system does lose vacuum, repeat steps 3 through 5 until the vacuum level remains stable for two minutes.
7. Carry out the required repairs.