F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
All vehicles
5. Disconnect the condenser to evaporator line from the A/C evaporator core.
6. Remove the eight pin-type retainers and the sight shield.
7. Disconnect the condenser-to-evaporator line from the A/C condenser core and remove the line.
-
Discard the O-ring seals.
INSTALLATION
1. To install, reverse the removal procedure.
-
Install new O-ring seals lubricated in clean mineral oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system. Refer to: Heating and Air Conditioning, Service and Repair, Evacuating and Charging,
See: Heating and Air Conditioning/Service and Repair/Evacuation and Charging