ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation
Page 2
background image

Front Lifting Points

Rear Lifting Points

WARNING:
-

If equipped, the electrical power to the air suspension system must be shut down prior to hoisting, jacking or towing an air suspension
vehicle. This can be accomplished by turning off the air suspension switch located below the glove box in the lower right of the front
passenger footwell. Failure to do so may result in unexpected inflation or deflation of the air springs which may result in shifting of the
vehicle during these operations.

--

When raising a vehicle on a twin-post hoist, use extreme care positioning the hoisting forks to avoid interference with the plastic midship
fuel tank.

CAUTION:
-

When raising a vehicle on a twin-post hoist, use care when positioning the vehicle so that the hoisting forks do not interfere with the
shock absorber mounting brackets or stabilizer mounting brackets, if so equipped, or damage the axle carrier or rear cover.

-

Damage to suspension, exhaust and steering linkage components can occur if care is not exercised when positioning the hoist adapters
prior to lifting the vehicle.

Hoist adapters for heavy-duty hoists must be positioned according to the hoist manufacturer's recommendations. Make sure the hoist has an adequate
lifting capacity for the vehicle being lifted.

Engine, Cooling and Exhaust > < Vehicle Lifting|Description and Operation