F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5. Position the Ford Axle Locknut Socket on the hub nut.
6. CAUTION: Under no circumstances are power tools to be used when performing these operations.
NOTE: The hub nut will ratchet as torque is applied.
Tighten the hub nut, rotating the rear hub occasionally while tightening.
7. Adjust hub nuts as follows:
^
For new bearings, ratchet back five teeth or notches (I/X turn) on the hub nut. Five notches must be felt during this operation in order to have
performed it correctly.
^
For used bearings, ratchet back seven teeth or notches (1/6 turn) on the hub nut. Seven notches must be felt during this operation to have
performed it correctly.