F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/f_250_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-1457002.png)
1. Install the O-ring seal and gasket.
2. NOTE:
-
Apply clean engine oil to the O-ring seal.
-
Position the grommets and spacer prior to installing the EGR cooler.
Install the EGR cooler and stud bolts hand-tight.
3. Install the EGR cooler bolt.
-
EGR cooler with a M6 bolt, tighten to 13 Nm (10 lb-ft).
-
EGR cooler with a M8 bolt, tighten to 31 Nm (23 lb-ft).
4. Tighten the EGR cooler stud bolts.
5. Install the intake manifold.