F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
11. CAUTION: Use care not to induce contamination in the form of dirt or foreign material when removing either of the sensors.
If necessary, remove the Turbine Shaft Speed (TSS) sensor.
1
Remove the bolt.
2
Remove the TSS.
12. Position the Heated Oxygen Sensor (H02S) connector aside.
13. If necessary, remove the Output Shaft Speed (OSS) sensor.
1
Remove the bolt.
2
Remove the OSS.
Installation
All vehicles