F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
11. Install the camber adjuster and a new pinch bolt.
12. Install the front disc brake rotor shield, front disc brake hub and rotor and the front disc brake caliper.
13. If equipped, install the front disc brake ABS sensor, retainer bolt and the ABS sensor harness bracket bolt.
14. Install the tie rod end in the front wheel spindle using a new nut and a new cotter pin.
15. Install the tire and wheel assembly.
16. Lower the vehicle and with the vehicle weight on the suspension, tighten the axle pivot bolt and nut to specification.
17. Perform front end alignment.