F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Transmission Position Switch/Sensor: Service and Repair
Torqshift - Automatic Transmission
Transmission Pressure Switch
Transmission Pressure Switch
Removal and Installation
NOTE: This procedure will not be applicable to all vehicle applications. Some vehicles will not have the pressure switches or the harness installed in
the valve body.
1. Remove the transmission fluid pan, gasket and filter.
2. Disconnect the affected pressure switch electrical connector (if equipped).
3. Remove the affected pressure switch (if equipped).
^
Remove the retaining "W" clip.
^
Remove the affected pressure switch (if equipped).
4. To install, reverse the removal procedure.
Digital Transmission Range (TR) Sensor
Digital Transmission Range (TR) Sensor
Removal
1. With the vehicle in NEUTRAL, position on a hoist. For additional information, refer Maintenance/Service and Repair.