F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
![background image](/ford/f_250_2wd_super_duty/v8-6.0l_dsl_turbo_vin_p/Page-1932009.png)
20. NOTE: Use a vise with brass jaws or wood blocks.
Place the differential case in a vise.
21. CAUTION: Do not damage the anti-lock speed sensor ring when removing the differential ring gear. If removing the anti-lock speed sensor ring,
discard it and install a new one.
NOTE: Always use new bolts upon reassembly.
Remove the ring gear bolts. Leave four bolts loosely assembled, 90 degrees apart.
22. Tap each bolt head alternately with a rawhide or plastic hammer to loosen the differential ring gear. Remove and discard the bolts. Remove the
differential ring gear.
23. If necessary, remove the anti-lock speed sensor ring with a soft-faced hammer. Discard the anti-lock sensor ring.