F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4. NOTE: Do not install the pinion seal at this time.
Using the special tool, install the pinion flange.
5. Install the hex nut.
Using a suitable torque multiplier, tighten the hex nut.
Measuring pinion bearing preload torque
6. Measure the torque to rotate.
^
Take torque measurements every fourth revolution.
^
Proceed to Pinion bearing preload adjustment in this procedure if the bearing preload torque is not within the specifications. Proceed to Final
assembly in this procedure if the bearing preload torque is within the specifications.
Pinion bearing preload adjustment