F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
3. CAUTION: Align the index marks.
Slide the driveshaft slip-yoke on the transmission output shaft.
Vehicles with circular flange
4. CAUTION: Align the index marks.
NOTE: Bolt direction is vehicle application dependent.
Position the driveshaft yoke on the transmission flange.
Vehicles with split pin flange
5. Remove the tape from the bearing cups.
6. CAUTION: Align the index marks.
Position the bearing cups in the rear axle pinion flange.
Vehicles with circular flange