F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
5. NOTE: Lubricate the O-ring with Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
To install, reverse the removal procedure.
Full Floating Rear Axle-Ford
Axle Shaft
Removal
1. NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
Loosen and remove the retaining bolts.
2. Remove the axle shaft.
3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and replace it if required.