F 250 2WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
23.
Remove driver's side transition block from lower aluminum channel by prying loose with a screw driver (Figure 11).
24.
Remove passenger side transition block and cable cover from lower aluminum channel by prying loose with a screw driver (Figure 11).
25.
Once cable assemblies are loose from aluminum channel, slide glass carrier towards driver's side end and out of aluminum channel (Figure 12).
26.
Remove cable ends from black carrier using access holes in the bottom of the carrier (Figure 13).
27.
Discard carrier and glass.
28.
Obtain new center glass assembly.