F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
REMOVAL
1. To replace the rear lamp, remove the two nuts from the mounting studs.
2. Disconnect the two connectors (red-black stripe wire and wire with green insulator) inside the frame side rail.
3. Unhook the wires from the retaining clip and pull the wires out.
INSTALLATION
1. Insert the studs of the replacement lamp body into the holes of the lamp mounting bracket.
2. Tighten the stud nuts to 16-27 N.m (12-20 Lb-Ft).