F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
Fluid Line/Hose: Service and Repair
Removal and Installation
REMOVAL
1. Place a drain pan under the fluid cooler hose to be removed.
2. Loosen the fluid cooler hose clamps.
3. Remove the fluid cooler hose.
INSTALLATION
1. Follow the removal procedure in reverse order.
-
Replenish transmission fluid to proper operating levels.
-
Tighten the fluid cooler hose clamps to 3.1-4.3 Nm (27-38 inch lbs).
-
Start engine and check for leaks.