F 250 4WD HD Pickup V8-460 7.5L VIN G EFI (1997)
3. Mount Front Hub Remover/Replacer T81P-1104-C on the bearing cone remover, making sure the remover/replacer shaft seats in the bore of the
step plate. Pull the differential bearing off the differential case.
CAUTION: It is extremely important to apply a liberal amount of oil to the screw threads of the remover/replacer.
4. Replace differential bearings whenever they are removed from the differential.
INSTALLATION
1. Install differential bearings on the case hubs using Differential Bearing Cone Replacer D81T-4221-A or equivalent.
NOTE: When performing the following procedure, press against the differential bearing cone only.