F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
Anti-Lock Brake Control Module Removal
-
Remove the anti-lock brake control module.
1
Remove the screws (1).
2
Remove the ABS control module (2).
INSTALLATION:
Hydraulic Brake Lines Torque Specifications
-
To install, reverse the removal procedure.
NOTE:When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16km (10 mi) or more to relearn the strategy.