F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
-
To install, reverse the removal procedure.
Parking Brake Front Cable And Conduit
REMOVAL:
Parking Brake Control Tension Relief
-
Relieve the tension on the parking brake system.
NOTE: Make sure the parking brake control is fully released.
1
Pull the front parking brake cable and conduit.
2
Insert a suitable retainer.
-
Disconnect the front parking brake cable and conduit from the RH parking brake rear cable and conduit.
^
Pull the front parking brake cable and conduit rearward to unclip it from the RH parking brake rear cable and conduit.