F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
Piston Pin: Service and Repair
DISASSEMBLY
1. Use Piston Pin Tool to press the piston pin out from the connecting rod and piston assembly.
2. Remove the connecting rod from the piston.
3. Clean and inspect the connecting rod and piston.
ASSEMBLY
1. Lubricate the piston pin and piston pin bore.
^
Use engine oil meeting Ford specification WSE-M2C908-A1.
2. Position the piston pin in the bore aligned with the connecting rod bore.
NOTE: The connecting rod can be installed in either direction.
