F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
Ride Height Sensor: Service and Repair
REMOVAL
1. Turn the air suspension switch to the off position.
WARNING: BEFORE REPAIRING ANY AIR SUSPENSION COMPONENTS, DISCONNECT POWER TO THE SYSTEM BY
TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA TO PREVENT VEHICLE
DAMAGE OR PERSONAL INJURY.
2. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER SUPPLY TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO
HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE
AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
3. Disconnect the air suspension height sensor electrical connector.
