F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
7. Remove the (A) forward clutch hub and the (B) No. 3 forward clutch hub front bearing.
NOTE: The forward clutch hub may remain in shell during disassembly.
8. Remove the clutch pack selective retaining ring.
NOTE: To aid handling, the forward clutch assembly may be set in the extension housing or a hole in the work bench.
9. Remove the (A) pressure plate, (B) clutch pack and (C) pressure spring.
10. Use (A) Direct Clutch Spring Compressor T81P-70235-A and an arbor press to remove the (B) forward clutch retaining ring.
CAUTION: Apply only enough pressure to release pressure on the retaining ring.
11. Slowly release the press and remove the forward clutch from the press.