F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
Clutch: Technical Service Bulletins
A/T - E4OD Unique Parts Application
Article No.
96-21-17
10/07/96
TRANSMISSION - E4OD - UNIQUE OVERDRIVE RING GEAR, ONE-WAY CLUTCH RETAINING RING AND SHAFT RETAINING RING -
SERVICE TIP
LIGHT TRUCK:
1996 BRONCO
1996-97 ECONOLINE, EXPEDITION, F SUPER DUTY, F-150-350 SERIES
This TSB article is being republished in its entirety to revise the applicable models and years.
ISSUE:
Some 1996 and 1997 vehicles with E4OD transmissions were built with unique overdrive ring gears, one-way clutch retaining ring and center shaft
retaining ring (Figure 1).
ACTION:
If service is required on any of these unique transmissions and replacement of either the overdrive ring gear, one-way clutch retaining ring or center shaft
retaining ring is required, all three (3) parts must be replaced. Use current level parts for replacement.
PART NUMBER
PART NAME
E9TZ-7A153-A
Overdrive Ring Gear
E9TZ-7G375-A
Retaining Ring (2 Req'd.)
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 96-6-11
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 504000