F 250 4WD LD Pickup V8-281 4.6L VIN W EFI (1997)
8. Remove the U-washers.
(1) Push the axle shafts inboard.
(2) Remove the U-washers.
CAUTION: Do not damage the rubber O-rings in the axle shaft grooves.
9. Reinstall the differential pinion shaft.
(1) Install the shaft.
(2) Install the lock bolt finger tight.
10. Remove the two axle shafts.
CAUTION: Do not damage the axle shaft oil seal.
INSTALLATION
1. Lubricate the lip of the axle shaft oil seal.
-
Use Premium Long-Life Grease XG-1-C or XG-1-K or equivalent meeting Ford specification ESA-M1C75-B.
2. Remove the differential pinion shaft.
