F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
-
Install the front disc brake caliper.
1
Position the front disc brake caliper.
2
Install the front disc brake caliper bolts.
-
Install the front brake hose.
1
Use new copper washers; connect the front brake hose.
2
Install the front brake hose bolt.
-
Bleed the front disc brake caliper; refer to Hydraulic System Service And Repair.
-
Clean the wheel hub mounting surface.
WARNING: ALWAYS REMOVE ANY CORROSION, DIRT OR FOREIGN MATERIAL PRESENT ON THE MOUNTING SURFACES
OF THE WHEEL OR THE SURFACE OF THE WHEEL HUB, BRAKE DRUM OR FRONT DISC BRAKE ROTOR THAT
CONTACTS THE WHEEL. INSTALLING WHEELS WITHOUT PROPER METAL TO METAL CONTACT AT THE
WHEEL MOUNTING SURFACES CAN CAUSE THE LUG NUTS TO LOOSEN AND COULD ALLOW THE WHEEL TO
COME OFF WHILE THE VEHICLE IS IN MOTION, CAUSING LOSS OF CONTROL.
Wheel And Tire Assembly - Lug Nut Tightening Specification
-
Install the tire and wheel assembly.
-
Inspect brake operation.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
