ford Workshop Repair Guides

Ford F 250 4WD LD Pickup V8-54L SOHC VIN L Repair Manuals

Brakes - Elimination Of Sanding Rotors And Drums|Page 7604 > < Brakes - Elimination Of Sanding Rotors And Drums|Page 7602
Page 1
background image

Brake Drum: Service and Repair

REMOVAL:
  

NOTE:Make sure the parking brake control is fully released.

Parking Brake Cable

-

Relieve tension on parking brake system.
1

Pull the front parking brake cable and conduit. 

2

Insert a suitable retainer pin.

       

CAUTION:Do not use heat to loosen a seized lug nut. Heat can damage the wheel and the wheel bearings.

-

Loosen the lug nuts.        
1

Remove the center cap.

2

With the weight of the vehicle on the wheels, loosen the lug nuts.

         

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,

JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE
AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN
UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE
VEHICLE DURING THESE OPERATIONS.

      

-

Raise and support vehicle.

Brakes - Elimination Of Sanding Rotors And Drums|Page 7604 > < Brakes - Elimination Of Sanding Rotors And Drums|Page 7602