F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
1. Connect a clear waste line to the affected disc brake caliper bleeder screw and submerge the free end of the tube in a container partially filled with
clean brake fluid.
2. Open the bleeder screw and cycle the brake pedal 25 to 30 times or until no more air is seen at the waste line.
Front Brake Caliper Bleeder Screw Torque Specification
3. Tighten the disc brake caliper bleeder screw.
4. Disconnect the waste line.
5. Fill the brake master cylinder reservoir with High-Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford
specification ESA-M6C25-A, DOT 3.
Disc Brake Caliper Bleeding