F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Air Flow Meter/Sensor: Service and Repair
Installation
INSTALLATION
CAUTION:
-
Do not tamper with the MAF sensing elements located in the airflow bypass; tampering may result in unit failure.
-
The grommet used to seal the engine air cleaner housing at the extension harness must be fully seated. Failure to do so will result in unmetered air
entering the engine.
NOTE:
-
Use the alignment notch to properly align the inlet side and the outlet side of the engine air cleaner.
-
The MAF sensor module and body are calibrated and replaced as a unit.
To install, reverse the removal procedure.