F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Fuel Rail: Service and Repair
Removal
REMOVAL
1. Perform Fuel Pressure Release Procedure.
2. Partially drain the cooling system.
3. Remove the power steering reservoir bracket.
1
Remove the three power steering reservoir bolts.
2
Remove the power steering reservoir bracket.
4. Remove the accelerator control splash shield.
1
Remove the three accelerator control splash shield bolts.
2
Remove the accelerator control splash shield.
5. Disconnect the fuel pressure regulator valve vacuum hose.
6. Disconnect the fuel lines.
CAUTION: After disconnecting, plug the fuel lines to prevent leakage.