F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Blower Motor Relay: Testing and Inspection
1. Measure resistance between relay terminal 85 and all other terminals. If any resistance is 5 ohms or less, replace relay. Otherwise, continue with
test.
2. Use jumper wires to apply battery voltage to terminals 30 and 85. Measure voltage at terminal 87A. If voltage is less than 10 volts, replace relay.
Otherwise, continue with test.
3. Use a jumper wire to apply ground to terminal 86. Measure the voltage at terminal 87. If voltage is less than 10 volts, replace relay. Otherwise,
return to pinpoint tests.