F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Braking Sensor/Switch: Service and Repair
REMOVAL:
Power Brake Booster Push Rod Removal
-
Disconnect the brake pedal to power brake booster push rod.
1
Remove the self locking pin.
2
Remove the Brake On/Off (BOO) Switch.
^
Separate the (A) BOO switch from the (B) brake booster push rod.
4
Remove the brake booster push rod spacer.
5
Remove the brake booster push rod bushing.
INSTALLATION:
-
To install, reverse the removal procedure.