F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
3. Install the front shock absorber lower bolt and nut to the front suspension lower arm.
4. Install the front suspension arm lower ball joint castellated nut.
(1) Position the front wheel knuckle.
(2) Install the front suspension arm lower ball joint castellated nut.
(3) Install a new cotter pin.
5. Load the torsion bar.
(1) Install the torsion bar adjuster.
(2) Install Torsion Bar Tool with the Torsion Bar Tool Adapters in the B slots on the Torsion Bar Tool.
(3) Tighten the Torsion Bar Tool to load the torsion bar.
(4) Install the torsion bar adjuster nut.
(5) Install the torsion bar adjuster bolt.
(6) Remove the Torsion Bar Tool.
^
Turn the torsion bar adjuster until the reference marks align.
^
Repeat for the other side.
6. Install the wheel hub.
