F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
Clutch: Service and Repair
Center Support Clutch
DISASSEMBLY
1. Using the (A) O-Ring Tool, remove and discard the (B) direct clutch seal rings. Remove the (C) No. 6 center support thrust washer.
2. Inspect the following for contamination or damage. Clean or replace, as necessary.
-
No. 6 center support thrust washer (A) seal ring grooves (B) inner hub diameter (C) outer hub diameter (D) feedbolt threads (E) ball bearing
(F)
ASSEMBLY
1. Follow the removal procedure in reverse order.
-
Lightly lubricate the thrust washer with petroleum jelly to hold it in place during assembly.
-
Install new seals.