F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
7. Install the solenoid body assembly.
(1) Install the solenoid body assembly.
(2) Install the nut.
(3) Install the bolts finger-tight.
NOTE: Prior to installing the solenoid body assembly, coat the case connector bore with Silicone Dielectric Compound D7AZ-19331-A or
equivalent meeting Ford specification ESA-M1C171-A.
8. Install the main control valve body.
(1) Install the main control valve body.
(2) Aligning the manual shift valve with the manual valve detent lever.
(3) Install the nuts finger-tight.
(4) Install the bolts finger-tight.
