F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
(1) Position the appropriate differential bearing (RH or LH).
(2) Use the appropriate press to install the differential bearing.
-
Repeat for the other differential bearing.
38. Install Dial Indicator Bracketry and Dial Indicator.
(1) Install Differential Housing Spreader.
(2) Install Dial Indicator Bracketry and Dial Indicator.
NOTE: Make sure the indicator needle is in the spreader adapter hole.
39. Spread the front axle housing.
CAUTION: Overspreading may cause damage to the front axle housing.
40. Position the differential bearing shims.
(1) Apply a light coating of Premium Long Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-MlC75-B to one side of the
differential bearing shims to help hold them in place.
(2) Position the differential bearing shims.
CAUTION: Never attempt to drive differential bearing shim in place. The front axle housing machined surfaces may be permanently damaged.