F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
4. If removed, position the axle shaft dust deflector.
(1) Position (A) Axle Bearing/Seal Plate on the (B) press bed.
(2) Position Outer Shaft Deflector Replacer.
(3) Position the axle shaft dust deflector.
5. If removed, use the appropriate (A) press to press the (B) axle shaft dust deflector on the (C) axle shaft.
6. Insert the axle shaft into the axle tube housing.
7. Use (A) Driver Handle and (B) Inner Axle Shaft Bearing Replacer to install the (C) front axle shaft pilot bearing into the (D) clutch gear.