F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
41. Position the differential case assembly.
(1) Position the differential bearing cups on the differential bearings.
(2) Lower the differential case assembly in place between the differential bearing shims.
NOTE: Push the differential case down to fully seat the differential bearing cups in the front axle housing.
42. Install the bearing caps in their original positions and tighten with the housing still spread.
(1) Position the bearing caps.
(2) Install the bolts.
43. Remove the Differential Housing Spreader and reposition the Dial Indicator Bracketry.
44. Measure the ring gear backlash.
(1) Mount the (A) dial indicator on the (B) indicator base.
(2) Position the indicator needle and zero the indicator.