F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
2.
Cut a 95 mm (3.75") length of Hose (F75Z-4A058-AA) and attach to the axle tube assembly vent (Figure 2).
NOTE:
TWO (2) VENTS MAY BE REQUIRED TO COMPLETE THIS REPAIR: ONE FOR THE AXLE TUBE IF NOT EQUIPPED, AND THE
OTHER TO BE USED AS A CONNECTOR BETWEEN THE NEWLY CUT HOSE AND EXISTING VENT HOSE.
3.
Insert the threaded end of the second vent into the open end of the 95 mm (3.75") hose.
4.
Connect the existing vent hose to the 95 mm (3.75") hose.
5.
Check the axle tube for leaks after axle installation.
PART NUMBER
PART NAME
F75Z-4K206-AA
Front Axle Tube Assembly
F65Z-4022-AA
Vent
F75Z-4A058-AA
Hose
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-9-21
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
971010A
Replace Tube Assembly
2.0 Hrs.
(Includes Time To Install
Vent If Required)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
4K206
12
OASIS CODES: 509000, 510000