F 250 4WD LD Pickup V8-5.4L SOHC VIN L (1997)
![background image](/ford/f_250_4wd_ld_pickup/v8-5.4l_sohc_vin_l/Page-1665002.png)
5. Remove the upper ball joint castle nut.
a. Remove and discard the cotter pin.
b. Remove the castle nut.
6. Using Pitman Arm Puller, separate the front wheel knuckle from the front suspension upper arm.
7. Remove the six front wheel halfshafts and joint bolts.
8. Separate the halfshaft assembly from the hub and remove the halfshaft assembly from the vehicle.
CAUTION: Use caution to avoid damaging the hub seal when removing the front drive halfshaft.
INSTALLATION