F 250 4WD Pickup V6-4.2L VIN 2 (1998)
1
Hold the pinion inside the carrier housing.
2
Use a soft face hammer and remove the pinion from the carrier housing.
26. Remove the pinion seal and the oil slinger.
CAUTION: Do not damage the front axle housing while removing the pinion seal.
27. Use the Puller Tool and the Slide Hammer to remove the inner bearing cup.
28. If necessary, remove the baffle.
NOTE: A baffle to aid bearing lubrication is positioned behind the inner bearing cup. Normally this can be left in position if the inner bearing cup
is removed.
29. Remove the outer axle pinion bearing cup, tapping alternately on each side to prevent the outer axle pinion bearing cup from cocking.