F 250 4WD Pickup V8-302 5.0L (1986)
Wheel Cylinder: Service and Repair
Rebuild
For additional information see Notes, Warnings, and Hints.
Rear Wheel Cylinder
DISASSEMBLY
1. Remove the rubber boots from the ends of the brake cylinder.
2. Remove the pistons, cups and piston cup spring.
3. Remove the wheel cylinder bleeder screw. Ensure the bleeder screw is not plugged.
ASSEMBLY
1. Coat all wheel cylinder parts with clean brake fluid or brake assembly lube.
2. Install the bleeder screw into the wheel cylinder.
3. Place the wheel cylinder piston cup spring, cups and pistons into the wheel cylinder.
4. Install a boot and wheel cylinder brake shoe link over each end of the wheel cylinder.