F 250 4WD Pickup V8-302 5.0L VIN F 2-bbl (1985)
Fuel Injector: All Technical Service Bulletins
Engine - Rough Idle or Stumble
Article No.
93-11-4
05/26/93
^
FUEL INJECTORS - NON-DEPOSIT RESISTANT TYPE - DEPOSIT FORMATION
^
IDLE - ROUGH - LEAN FUEL FLOW CAUSED BY FUEL INJECTOR PINTLE DEPOSIT FORMATION
^
STUMBLE - LEAN FUEL FLOW CAUSED BY FUEL INJECTOR PINTLE DEPOSIT FORMATION
FORD:
1988-90 TAURUS, TEMPO
1988-91 MUSTANG
LINCOLN-MERCURY:
1988-89 CONTINENTAL
1988-90 SABLE, TOPAZ
1988-91 MARK VII
LIGHT TRUCK:
1985-91 BRONCO, ECONOLINE, F-150-350 SERIES
1988-91 F-47, F-53
This TSB article is being republished in its entirety to correct the part number for the 7.5L engine injector assembly.
ISSUE:
A stumble or rough idle condition may be caused by lean fuel flow resulting from pintle deposit formation on non-deposit resistant fuel injectors. These
non-deposit resistant fuel injectors are susceptible to pintle deposit formation.
ACTION:
If service is required, install deposit resistant injectors. These Deposit Resistant Injectors (DRI'S) are acceptable service replacements for non-deposit
resistant injectors that exhibit lean fuel flow. Refer to the DRI Replacement Chart for correct parts usage.
Parts Block
NOTE:
FUEL INJECTOR REPLACEMENT IS ONLY ALLOWED WHEN LEAN FLOW IS VERIFIED BY UTILIZING THE SERVICE BAY
DIAGNOSTIC SYSTEM (SBDS) OR ROTUNDA FUEL INJECTOR CLEANER (113-0001).
SUPERSEDES:
92-24-5