F 250 4WD Pickup V8-4.6L SOHC VIN W (1998)
1. Install the rear disc brake caliper.
CAUTION: To prevent interference with rear disc brake caliper operation, install only the correct caliper bolt.
NOTE:
-
Make sure the stainless steel shoe slippers are correctly positioned. Replace if worn or damaged.
-
When installed, the locator notch on the brake pads will be located at the upper end of the rear disc brake caliper.
2. Install the rear wheel brake hose.
-
Connect the brake hose and install the caliper flow bolt.
-
Use new copper washers.
3. Bleed the disc brake caliper.
4. Install the wheel and tire assembly.
NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.
5. Verify proper brake operation.
