F 250 4WD Pickup V8-4.6L SOHC VIN W (1998)
4. Pull to release the three clips and remove the lower instrument panel steering column cover.
5. Position the parking brake control release handle aside.
1
Remove the screws.
2
Position the handle aside.
Parking Brake Control Assembly Removal/Installation
6. Separate the parking brake control from the cowl side.
1
Disconnect the parking brake signal switch electrical connector.
2
Remove the parking brake control bolts.
3
Separate the parking brake control from the cowl side.
7. Disconnect the front parking brake cable and conduit from the parking brake control.
