F 250 4WD Pickup V8-4.6L SOHC VIN W (1998)
1. Install the rear brake shoes and linings along with the inboard brake shoe retracting spring.
NOTE: Lubricate the brake shoe contact point before installation of rear brake shoes using Silicone Brake Caliper Grease and Dielectric
Compound D7AZ-19A331-A (Motorcraft WA- 10) or an equivalent silicone compound meeting Ford specification ESE-M1C171-A.
2. Install the brake shoe hold-down springs.
3. Install the brake adjuster screw.
4. Install the brake shoe adjusting screw spring.
