F 250 4WD Pickup V8-460 7.5L (1984)
Fig. 7 Stabilizer bar replacement. 1981---87 F-250---350
1981---87 F-100---350 & BRONCO
1.
Remove nut from lower end of stabilizer link, Figs. 6 and 7.
2.
Remove outer washer and insulator, then disconnect stabilizer from link.
3.
Remove inner insulators and washers.
4.
Remove stabilizer link attaching nuts and bolts, then disconnect link from frame.
5.
Remove U-bolt, bracket and retainer attaching nuts, then the stabilizer bar from vehicle.
6.
Reverse procedure to install.