F 250 4WD Pickup V8-7.3L DSL Turbo VIN K (1994)
Idle Speed: Adjustments
Low Curb Idle Speed Adjustment
LOW CURB IDLE SPEED ADJUSTMENT
1. Place transmission in NEUTRAL or PARK.
2. Bring engine up to normal operating temperature.
3. Idle speed is measured with manual transmission in NEUTRAL and automatic transmission in DRIVE.
4. Make sure that low idle adjusting screw is against the stop. If not, correct vehicle linkage.
5. Check low idle speed, using Rotunda 055-00108 or equivalent. Low idle speed is specified on the Vehicle Emissions Control Information (VECI)
decal. Adjust to specification using idle speed adjusting screw.
6. Place transmission in NEUTRAL or PARK. Rev engine momentarily. Place transmission in specified gear and check low idle RPM. Adjust again
if necessary.