F 250 4WD Super Duty V10-6.8L VIN S (2001)
3. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Install the rear transmission mount.
1
Raise the transmission up.
2
Install the rear transmission mount.
3
Install the bolts.
4. Lower the transmission on to the rear crossmember support.
5. Install the transmission insulator and nuts.
6. Remove the high-lift transmission jack.
4X2 vehicles
7. Install the driveshaft.
4X4 vehicles
8. Install the transfer case.
All vehicles
9. Lower the vehicle.
10. Check fluid level, fill with clean automatic transmission fluid.
11. Check for correct operation.
