F 250 4WD Super Duty V10-6.8L VIN V (2005)
To install, reverse the removal procedure.
Body Support - Rear, Regular Cab, Lower
BODY SUPPORT-REAR, REGULAR CAB, LOWER
Removal and Installation
1. Move the front seat forward.
2. Move the front seatback forward.
3. If equipped, remove the utility tray behind the seat.
4. Pull the carpet, or mat back to see the rear body insulator bolt head.
5. Remove and discard the bolt.
6. Remove the insulator.
7. NOTE:
-
Do not reuse body support mounting fasteners. New fasteners must be installed for each fastener that has been removed or loosened.
-
No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
Body Support - Rear, Supercab, Lower
BODY SUPPORT-REAR, SUPERCAB, LOWER
Removal and Installation
1. Move the front seat forward.
2. Remove the vehicle jack.
3. Remove the rear seat.